COMPONENTS

Hope RX: the gravel and XC stem moves to -6° and gains more lengths

Hope updates its UK-machined RX stem: a -6° angle in four lengths, the -15° kept in 80 mm, at €150 excluding tax.

Hope RX: the gravel and XC stem moves to -6° and gains more lengths

IN BRIEF

Hope is updating the RX, its stem for gravel and cross-country. It moves to a -6° angle in four lengths, from 70 to 100 mm, while the lower -15° version is still offered in 80 mm. Machined from 2014-T6 aluminium at the Barnoldswick factory in the United Kingdom, it comes in seven colours. The recommended retail price is €150 excluding tax.


Recommended retail price€150 excluding tax (£120, $165)
-6° angle70, 80, 90 and 100 mm
-15° angle80 mm
MaterialCNC-machined 2014-T6 aluminium
ManufacturingBarnoldswick (United Kingdom)
Handlebar clamp31.8 mm
Steerer28.6 mm
Faceplate4 bolts, optional titanium bolts
Coloursblack, silver, smoke, blue, red, purple, orange

Hope RX stem: an in-between angle

Until now, the Hope RX came in two angles: 0°, in 70 and 90 mm, and -15°, in 80 mm. The 2026 version moves to a -6° angle, offered in 70, 80, 90 and 100 mm. The official product page states that the -15° is still offered in 80 mm.

For the same length, a negative-angle stem puts the handlebar lower than a 0° stem. The -6° therefore offers a compromise between an upright position and the low position of the -15°, with four lengths to fine-tune reach, whereas the -15° comes in just one. For a race gravel bike or a cross-country mountain bike, the choice thus comes down to two settings: handlebar height and the distance between saddle and hands.

Blue Hope RX stem seen in profile on a black stand
The Hope RX in 80 mm and -15°, shown here in blue. Photo Hope

Machined in the United Kingdom

The RX is machined from 2014-T6 aluminium in Barnoldswick. It clamps a 31.8 mm handlebar on a 28.6 mm steerer, with a four-bolt faceplate; a titanium bolt kit is available as an option. Seven anodised finishes are listed: black, silver, smoke, blue, red, purple and orange. The official product page lists a recommended retail price of €150 excluding tax.

0 Link copied Back
COMPONENTSHope’s 20 mm stem raises the handlebar by 35 mmHope releases the 20mm Gravity Stem: just 20 mm of reach, but 35 mm of stack. A stem machined from solid that raises the handlebar instead of extending it.Read the article